Base Plates |
|
 |
24” camera base plate with 15mm or 19mm studio rod supports –item #B3-24, $950.00 each |
 |
18" camera base plate-item #B2-18, $665.00 each |
 |
12” camera base plate-item #B1-12, $470.00 each |
 |
Complete Package- |
 |
B3-24 Heavy Lens Bases plate with (1) studio rod support and Quick Release Plate-$1025.00- Item#B3-24-QP |
| Download Base Plate Product Sheet | |
Spidergrips |
|
 |
Spidergrips dual-handle complete set item #SP2-15 or #SP2-19 $850.00 |
 |
Spidergrips single handle unit item #SP1-15 or #SP1-19 $725.00 each |
 |
Spidergrips Preston Microforce Adapter Bracket unit item #SP-MCA $225.00 each |
 |
Spidergrips Microforce Rosette Bolt-on Disc Assembly item #SP-RDC $75.00 Installation available for a fee of $50.00 |
 |
Spidergrips On/Off Module #SP-ONF $225.00 each |
 |
36" straight RED Camera 4 Pin Lemo Auxiliary Port Control Cable part #SP-RDC $150.00 (Spidergrips On/Off Module sold separately) |
| 6" to 20" coiled ARRI Camera 3 Pin Fischer Control Cable part #SP-ARC $150.00 (Spidergrips On/Off Module sold separately) | |
| 36" straight Open Ended Camera Control Cable part #SP-NC $75.00 (Spidergrips On/Off Module sold separately) | |
| *Please specify a choice of 15mm or 19mm studio rod configuration. | |
| Download Spidergrips Product Sheet | |
Quick Mount Components |
|
 |
Star Mount, item #QMS1, $110.00 each |
 |
Barrel Mount, item #QMB1, $90.00 each |
 |
Monitor Yoke Assembly, item #QMY1, $85.00 each |
 |
Quick-Mount Basic Package item #QM1(includes Star mount and Barrel mount) $190.00 each |
| Download Quick Mount Components Product Sheet | |
Arri Alexa Accessories |
|
 |
This adapter bar attaches to the CAS B3-24 Heavy Lens bottom base plate when using the Arri Alexa Camera with the QR-HD1 top baseplate. This adapter bar sandwiches between the rod support bracket and the heavy lens baseplate to align the rod support of the B3-24 with the offset built into the Arri QR-HD1. Place B3-ALX adapter and rod support assembly on the bottom step of the heavy lens baseplate. Item # B3-ALX $150.00 each. |
 |
The ALX 15mm Multi-plate bolts onto the top of the Arri Alexa Camera body with 4 captive fasteners. It is very lightweight and has many Arri compatible 3/8-16 UNC threaded accessory holes on the top and sides. It has measuring tape hooks on each camera side and has two 15mm studio rod clamps spaced 100mm apart for additional accessories to be mounted on rods out the rear of the Alexa camera body. The Alexa carrying handle and Optics Block can be attached to the top of the ALX-15MP. The ALX-15MP clears the Arri Alexa's rear venting slots as well. 15mm studio rods are not included. Item # ALX-15MP $675.00 each. |
 |
The ALX-STBP is a lightweight, low profile Steadicam bottom support plate for use with the Arri Alexa camera. It has many 3/8-16 UNC threaded holes for steadicam dovetail plate placement. The ALX-STBP slides into the steel 'V' lock in the bottom rear of the Alexa camera body and bolts to the front bottom of the camera body with 2 captive 3/8-16 bolts. Item # ALX-STBP $475.00 each. |
Red Camera Accessories |
|
 |
Red Camera 15mm Studio Rod Accessory Plate with 3/8-16 and ¼-20 threaded holes- $165.00- Item #RDA-1 |
Lens Support |
|
 |
Lightweight, compact and durable 15mm and 19mm snap-on ‘Lowbridge’ Studio Lens Support Bracket-$470.00-Item#15SLSB or #19SLSB |
Additional Camera Accessories |
|
|
15mm or 19mm studio rod support bracket for B3-24 Heavy Lens Baseplate 15mm studio rod support bracket-$150.00- Item# B3-15SB 19mm studio rod support bracket-$150.00- Item#B3-19SB |
|
120mm long standard Ronford compatible Quick Release Plate-$105.00 Item# QRP-1 |
 |
15mm rod accessory mounting bracket. Can be used for mounting lens control motors and other accessories. Bolts into 3/8-16 holes and aligns into 3mm side holes to the front, rear, camera or back side horizontally or vertically on Arri 235, Arricam, and Arri 416 Motion Picture Cameras. - $128.00 Item# 15AC235 |
| 8.75% Sales tax applicable in California. | |
WARRANTY: Camera Accessory Solutions (CAS) guarantees all products for one(1) year from purchase date to be free of any defects in mechanical design or workmanship for the product(s) intended application and use. If any CAS product fails during use within the boundaries of its intended design and application, CAS will exchange any product free of charge, not including shipping and/or related or unrelated costs, or refund the product, not including shipping and/or related or unrelated costs, providing proof of purchase. CAS reserves the right to not honor any and all the warranties if upon examination of failed product(s) deems the level of product damage or mechanical failure to be questionable under the conditions and application(s) of its intended use. RETURN POLICY: CAS products may be exchanged or returned for a full refund of the purchase price, not including shipping and/or related or unrelated costs, with proof of purchase within a period of thirty(30) days from the date of purchase, providing the product is free of any damage or excessive wear as a result of use or misuse. DISCLAIMER: Camera Accessory Solutions (CAS) assumes no responsibility for damage to, or failure of its products or components of, damage to, or failure of any other products or components of in related use with, personal injury or death as a result of negligence or misuse of or with any CAS products or components of. CAS assumes no responsibility for damage to, or failure of its products or components of, damage to, or failure of any other products or components of, personal injury or death as a result of its products being used for purposes other that what they are designed and/or intended for. CAS reserves the right to change/alter the design and/or manufacturing methods of any of its products at any time without notification to or approval from any client or customer. |
|
